{"id":609,"date":"2026-07-16T15:44:32","date_gmt":"2026-07-16T07:44:32","guid":{"rendered":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/"},"modified":"2026-07-16T15:54:39","modified_gmt":"2026-07-16T07:54:39","slug":"h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices","status":"publish","type":"post","link":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/","title":{"rendered":"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices"},"content":{"rendered":"\n<h1 class=\"wp-block-heading\">H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices<\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">H13 tool steel (SKD61 \/ 1.2344 equivalent) is one of the most widely used hot work tool steels in die casting, hot forging, and extrusion industries. The performance of H13 tool steel depends largely on its heat treatment process. This guide covers the complete heat treatment cycle for H13 tool steel \u2014 from annealing to quenching to tempering \u2014 with recommended temperatures and expected hardness values.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why Heat Treatment Matters for H13 Tool Steel<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">H13 tool steel offers excellent toughness, high-temperature strength, and thermal fatigue resistance. However, these properties are only achieved through proper heat treatment. A poorly heat-treated H13 die can fail prematurely due to thermal cracking, erosion, or softening at elevated temperatures.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Proper heat treatment ensures:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Optimal hardness balance (toughness vs wear resistance)<\/li><li>Uniform microstructure for consistent performance<\/li><li>Maximum thermal fatigue resistance<\/li><li>Dimensional stability during service<\/li><\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">H13 Tool Steel Chemical Composition (Typical)<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Element<\/th><th>C<\/th><th>Si<\/th><th>Mn<\/th><th>Cr<\/th><th>Mo<\/th><th>V<\/th><\/tr><\/thead><tbody><tr><td>%<\/td><td>0.32-0.45<\/td><td>0.80-1.20<\/td><td>0.20-0.50<\/td><td>4.75-5.50<\/td><td>1.10-1.75<\/td><td>0.80-1.20<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">This composition gives H13 its excellent combination of hardenability, wear resistance, and toughness at elevated temperatures.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Complete H13 Heat Treatment Process<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">1. Annealing<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Purpose: Soften the steel for machining and relieve internal stresses.<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Temperature:<\/strong> 845-900\u00b0C (1550-1650\u00b0F)<\/li><li><strong>Soaking time:<\/strong> 1 hour per 25mm of thickness<\/li><li><strong>Cooling:<\/strong> Slow furnace cooling at 10-20\u00b0C per hour down to 500\u00b0C, then air cool<\/li><li><strong>Resulting hardness:<\/strong> 180-225 HB (Brinell)<\/li><\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">2. Preheating<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Purpose: Reduce thermal shock and minimize distortion during austenitizing.<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>First preheat:<\/strong> 650-700\u00b0C (1200-1300\u00b0F)<\/li><li><strong>Second preheat (recommended for large sections):<\/strong> 800-850\u00b0C (1475-1560\u00b0F)<\/li><li><strong>Soaking time:<\/strong> 30 minutes minimum<\/li><\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">3. Austenitizing (Hardening)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Purpose: Transform the microstructure to austenite for subsequent hardening.<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Temperature range:<\/strong> 995-1040\u00b0C (1825-1900\u00b0F)<\/li><li><strong>Recommended for die casting:<\/strong> 1010-1030\u00b0C (1850-1885\u00b0F)<\/li><li><strong>Soaking time:<\/strong> 20-45 minutes (depending on section size)<\/li><li><strong>Atmosphere:<\/strong> Protective atmosphere or vacuum furnace recommended to prevent decarburization<\/li><\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">4. Quenching<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Purpose: Rapid cooling to form martensite for high hardness.<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Method:<\/strong> High-pressure gas quenching (vacuum furnace), oil quenching, or salt bath<\/li><li><strong>Cool to:<\/strong> 50-70\u00b0C (120-160\u00b0F)<\/li><li><strong>Critical cooling rate:<\/strong> Minimum 1-2\u00b0C per second through the martensite transformation range (350-200\u00b0C)<\/li><li><strong>Note:<\/strong> Vacuum furnace with high-pressure gas quenching is preferred for complex die geometries<\/li><\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">5. Tempering<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Purpose: Relieve quenching stresses, improve toughness, and achieve final hardness.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Double tempering is essential for H13 tool steel.<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>First temper:<\/strong> 540-600\u00b0C (1000-1110\u00b0F), 2 hours minimum<\/li><li><strong>Cool to room temperature<\/strong> between tempers (critical step)<\/li><li><strong>Second temper:<\/strong> 540-600\u00b0C (1000-1110\u00b0F), 2 hours minimum<\/li><li><strong>Third temper (recommended for critical applications):<\/strong> Same cycle<\/li><\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Expected Hardness After Heat Treatment<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Tempering Temperature<\/th><th>Expected Hardness (HRC)<\/th><th>Application<\/th><\/tr><\/thead><tbody><tr><td>540\u00b0C (1000\u00b0F)<\/td><td>50-54 HRC<\/td><td>Maximum wear resistance<\/td><\/tr><tr><td>565\u00b0C (1050\u00b0F)<\/td><td>48-52 HRC<\/td><td>Balanced properties<\/td><\/tr><tr><td>595\u00b0C (1100\u00b0F)<\/td><td>44-48 HRC<\/td><td>Die casting dies<\/td><\/tr><tr><td>620\u00b0C (1150\u00b0F)<\/td><td>38-44 HRC<\/td><td>Impact resistance critical<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Common H13 Heat Treatment Problems and Solutions<\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li><strong>Soft spots:<\/strong> Caused by uneven heating or insufficient soaking. Verify furnace temperature uniformity (\u00b15\u00b0C)<\/li><li><strong>Excessive distortion:<\/strong> Cause by too-rapid heating or uneven quenching. Use preheating stages and vacuum furnace<\/li><li><strong>Decarburization:<\/strong> Surface carbon loss at high temperatures. Use protective atmosphere or vacuum furnace<\/li><li><strong>Inadequate hardness:<\/strong> Caused by low austenitizing temperature or insufficient soaking<\/li><\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">H13 Tool Steel from JF Metals<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">JF Metals supplies H13 tool steel (also available as SKD61 and 1.2344 equivalents) in round bar, flat bar, and plate forms. We support cutting, machining, MTC documentation, and export packing for overseas buyers.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Send your inquiry to <a href=\"mailto:penny@jf-metals.com\">penny@jf-metals.com<\/a> with grade, size, quantity, and delivery port for a quotation.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>H13 Tool Steel Heat Treatment Guide: Temperature, Hardn [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5,6],"tags":[],"class_list":["post-609","post","type-post","status-publish","format-standard","hentry","category-news","category-technical-papers"],"blocksy_meta":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices<\/title>\n<meta name=\"description\" content=\"Complete H13 tool steel heat treatment guide: annealing, austenitizing, quenching and tempering temperatures. SKD61 and 1.2344 equivalent grades included.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/\" \/>\n<meta property=\"og:locale\" content=\"zh_CN\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices\" \/>\n<meta property=\"og:description\" content=\"Complete H13 tool steel heat treatment guide: annealing, austenitizing, quenching and tempering temperatures. SKD61 and 1.2344 equivalent grades included.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/\" \/>\n<meta property=\"og:site_name\" content=\"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61576488632974\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/profile.php?id=61576488632974\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-16T07:44:32+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-16T07:54:39+00:00\" \/>\n<meta name=\"author\" content=\"Penny\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u4f5c\u8005\" \/>\n\t<meta name=\"twitter:data1\" content=\"Penny\" \/>\n\t<meta name=\"twitter:label2\" content=\"\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4\" \/>\n\t<meta name=\"twitter:data2\" content=\"3 \u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/\"},\"author\":{\"name\":\"Penny\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#\\\/schema\\\/person\\\/35a364c90d0cceb075cd967dc53acfee\"},\"headline\":\"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices\",\"datePublished\":\"2026-07-16T07:44:32+00:00\",\"dateModified\":\"2026-07-16T07:54:39+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/\"},\"wordCount\":570,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#organization\"},\"articleSection\":[\"News\",\"Technical Papers\"],\"inLanguage\":\"zh-Hans\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/\",\"url\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/\",\"name\":\"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness & Best Practices\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#website\"},\"datePublished\":\"2026-07-16T07:44:32+00:00\",\"dateModified\":\"2026-07-16T07:54:39+00:00\",\"description\":\"Complete H13 tool steel heat treatment guide: annealing, austenitizing, quenching and tempering temperatures. SKD61 and 1.2344 equivalent grades included.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/#breadcrumb\"},\"inLanguage\":\"zh-Hans\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/2026\\\/07\\\/16\\\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/jf-metals.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#website\",\"url\":\"https:\\\/\\\/jf-metals.com\\\/\",\"name\":\"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8\",\"description\":\"Mold Steel, Tool Steel, Alloy Steel and Ferroalloy Supplier in China\",\"publisher\":{\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/jf-metals.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#organization\",\"name\":\"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8\",\"url\":\"https:\\\/\\\/jf-metals.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/jf-metals.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/\u6377\u4e30Logo.png\",\"contentUrl\":\"https:\\\/\\\/jf-metals.com\\\/wp-content\\\/uploads\\\/2026\\\/05\\\/\u6377\u4e30Logo.png\",\"width\":750,\"height\":360,\"caption\":\"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8\"},\"image\":{\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61576488632974\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/--960a30405\\\/\",\"https:\\\/\\\/www.instagram.com\\\/panxia7810\\\/\",\"https:\\\/\\\/www.youtube.com\\\/@Penny-7810\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/jf-metals.com\\\/#\\\/schema\\\/person\\\/35a364c90d0cceb075cd967dc53acfee\",\"name\":\"Penny\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9a36c9c6c5e53a453161602279cdcdb1fd34ef9d8ca2e9c15de0d8bba1b33f53?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9a36c9c6c5e53a453161602279cdcdb1fd34ef9d8ca2e9c15de0d8bba1b33f53?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/9a36c9c6c5e53a453161602279cdcdb1fd34ef9d8ca2e9c15de0d8bba1b33f53?s=96&d=mm&r=g\",\"caption\":\"Penny\"},\"description\":\"\u6df1\u8015\u94a2\u94c1\u6750\u6599\u884c\u4e1a\u591a\u5e74\uff0c\u81f4\u529b\u4e8e\u5c06\u4e2d\u56fd\u9ad8\u54c1\u8d28\u6a21\u5177\u94a2\u4e0e\u94c1\u5408\u91d1\u63a8\u5411\u5168\u7403\u5e02\u573a\u3002\u667a\u6377\u4e30\uff08\u6df1\u5733\uff09\u5546\u8d38\u6709\u9650\u516c\u53f8\u5916\u8d38\u8d1f\u8d23\u4eba\u3002\",\"sameAs\":[\"https:\\\/\\\/jf-metals.com\",\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61576488632974\",\"https:\\\/\\\/www.instagram.com\\\/panxia7810\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/--960a30405\\\/\",\"https:\\\/\\\/www.youtube.com\\\/@Penny-7810\"],\"url\":\"https:\\\/\\\/jf-metals.com\\\/index.php\\\/author\\\/penny\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness & Best Practices","description":"Complete H13 tool steel heat treatment guide: annealing, austenitizing, quenching and tempering temperatures. SKD61 and 1.2344 equivalent grades included.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/","og_locale":"zh_CN","og_type":"article","og_title":"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness & Best Practices","og_description":"Complete H13 tool steel heat treatment guide: annealing, austenitizing, quenching and tempering temperatures. SKD61 and 1.2344 equivalent grades included.","og_url":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/","og_site_name":"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61576488632974","article_author":"https:\/\/www.facebook.com\/profile.php?id=61576488632974","article_published_time":"2026-07-16T07:44:32+00:00","article_modified_time":"2026-07-16T07:54:39+00:00","author":"Penny","twitter_card":"summary_large_image","twitter_misc":{"\u4f5c\u8005":"Penny","\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4":"3 \u5206"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/#article","isPartOf":{"@id":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/"},"author":{"name":"Penny","@id":"https:\/\/jf-metals.com\/#\/schema\/person\/35a364c90d0cceb075cd967dc53acfee"},"headline":"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices","datePublished":"2026-07-16T07:44:32+00:00","dateModified":"2026-07-16T07:54:39+00:00","mainEntityOfPage":{"@id":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/"},"wordCount":570,"commentCount":0,"publisher":{"@id":"https:\/\/jf-metals.com\/#organization"},"articleSection":["News","Technical Papers"],"inLanguage":"zh-Hans","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/","url":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/","name":"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness & Best Practices","isPartOf":{"@id":"https:\/\/jf-metals.com\/#website"},"datePublished":"2026-07-16T07:44:32+00:00","dateModified":"2026-07-16T07:54:39+00:00","description":"Complete H13 tool steel heat treatment guide: annealing, austenitizing, quenching and tempering temperatures. SKD61 and 1.2344 equivalent grades included.","breadcrumb":{"@id":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/#breadcrumb"},"inLanguage":"zh-Hans","potentialAction":[{"@type":"ReadAction","target":["https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/jf-metals.com\/index.php\/2026\/07\/16\/h13-tool-steel-heat-treatment-guide-temperature-hardness-best-practices\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"\u9996\u9875","item":"https:\/\/jf-metals.com\/"},{"@type":"ListItem","position":2,"name":"H13 Tool Steel Heat Treatment Guide: Temperature, Hardness &amp; Best Practices"}]},{"@type":"WebSite","@id":"https:\/\/jf-metals.com\/#website","url":"https:\/\/jf-metals.com\/","name":"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8","description":"Mold Steel, Tool Steel, Alloy Steel and Ferroalloy Supplier in China","publisher":{"@id":"https:\/\/jf-metals.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/jf-metals.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"zh-Hans"},{"@type":"Organization","@id":"https:\/\/jf-metals.com\/#organization","name":"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8","url":"https:\/\/jf-metals.com\/","logo":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/jf-metals.com\/#\/schema\/logo\/image\/","url":"https:\/\/jf-metals.com\/wp-content\/uploads\/2026\/05\/\u6377\u4e30Logo.png","contentUrl":"https:\/\/jf-metals.com\/wp-content\/uploads\/2026\/05\/\u6377\u4e30Logo.png","width":750,"height":360,"caption":"\u6e56\u5317\u6377\u4e30\u51b6\u91d1\u5de5\u8d38\u6709\u9650\u516c\u53f8"},"image":{"@id":"https:\/\/jf-metals.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61576488632974","https:\/\/www.linkedin.com\/in\/--960a30405\/","https:\/\/www.instagram.com\/panxia7810\/","https:\/\/www.youtube.com\/@Penny-7810"]},{"@type":"Person","@id":"https:\/\/jf-metals.com\/#\/schema\/person\/35a364c90d0cceb075cd967dc53acfee","name":"Penny","image":{"@type":"ImageObject","inLanguage":"zh-Hans","@id":"https:\/\/secure.gravatar.com\/avatar\/9a36c9c6c5e53a453161602279cdcdb1fd34ef9d8ca2e9c15de0d8bba1b33f53?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/9a36c9c6c5e53a453161602279cdcdb1fd34ef9d8ca2e9c15de0d8bba1b33f53?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/9a36c9c6c5e53a453161602279cdcdb1fd34ef9d8ca2e9c15de0d8bba1b33f53?s=96&d=mm&r=g","caption":"Penny"},"description":"\u6df1\u8015\u94a2\u94c1\u6750\u6599\u884c\u4e1a\u591a\u5e74\uff0c\u81f4\u529b\u4e8e\u5c06\u4e2d\u56fd\u9ad8\u54c1\u8d28\u6a21\u5177\u94a2\u4e0e\u94c1\u5408\u91d1\u63a8\u5411\u5168\u7403\u5e02\u573a\u3002\u667a\u6377\u4e30\uff08\u6df1\u5733\uff09\u5546\u8d38\u6709\u9650\u516c\u53f8\u5916\u8d38\u8d1f\u8d23\u4eba\u3002","sameAs":["https:\/\/jf-metals.com","https:\/\/www.facebook.com\/profile.php?id=61576488632974","https:\/\/www.instagram.com\/panxia7810\/","https:\/\/www.linkedin.com\/in\/--960a30405\/","https:\/\/www.youtube.com\/@Penny-7810"],"url":"https:\/\/jf-metals.com\/index.php\/author\/penny\/"}]}},"_links":{"self":[{"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/posts\/609","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/comments?post=609"}],"version-history":[{"count":1,"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/posts\/609\/revisions"}],"predecessor-version":[{"id":611,"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/posts\/609\/revisions\/611"}],"wp:attachment":[{"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/media?parent=609"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/categories?post=609"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jf-metals.com\/index.php\/wp-json\/wp\/v2\/tags?post=609"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}